A&D 2 Plus owner manual Functions at the Surface, Upon surfacing, Surface Mode Surface mode icon

Functions at the Surface

Upon surfacing

After reaching the surface, the Monitor 3 automatically switches into wait-mode for five minutes. This is the amount of time necessary to recognize the end of the dive. The five minute delay allows you to come to the surface to orient yourself, then resume the dive. If you stay at the surface longer than 5 minutes, the dive is entered into the logbook and the Monitor 3 Air switches into surface mode.

Display immediately upon surfacing

Section 2: Diving with the Monitor 3 Air

Surface Mode

Note: Surface mode will stay visible for 3 minutes. After that, the screen will go blank to save battery power. To reacti- vate the surface mode display, touch contacts A and D.

Surface mode icon

Five minutes after surfacing, the Monitor 3 enters Surface Mode. While in Surface Mode, the Surface Mode Icon appears at the bottom of the icon window.

Surface mode icon display

25