INTRODUCTION
Congratulations on your purchase! Your new Wireless mouse is easy to install and offers you a host of useful features. The IR receiver can be conveniently placed to give you the freedom you need while working. And, two wheels allow for easy scrolling in all directions no matter what the application. The vertical wheel allows you to scroll up and down; the horizontal wheel lets you scroll to the left and right or zoom in and out in a document. You can program the mouse buttons to launch the NetJump or LuckyJump for a quick start to programs you run frequently. You can even create your own Command Menu and with one click put all your favorite programs right under the cursor!
Connecting and Locating the IR Receiver
The IR receiver connects to your computer in the same way as a conventional mouse allowing you to place the receiver wherever is convenient on your desktop.
1.Locate the round
2.Insert the PS/2 connector into the PS/2 port.
Locating the IR Receiver
We recommend that you attach the receiver on the underside or side of your monitor as shown here, between 6~15 cm from the desktop. This will ensure optimal communication between the wireless mouse and the receiver.
To attach the receiver to the monitor |
|
The receiver is held in place with Velcro. First remove the backing paper |
|
from the Velcro pad and press it firmly in place. Now attach the receiver to |
|
the Velcro pad. | 6 ~ 15 cm |
Inserting the Batteries
The wireless mouse uses two AAA batteries. For best performance, use only alkaline batteries. Refer to the following to insert the batteries:
1.Press the tab on the bottom of the mouse cover as shown here and remove the cover.
2.Insert the two AAA batteries. (The correct polarity is indicated on the battery compartment casing.)
3.Replace the cover.
Using the wireless mouse
Operate the wireless mouse as you would a conventional mouse. The mouse has two transmitters, guaranteeing you the flexibility of movement you need (up to 160 degrees), whether editing text or working in graphic applications.
Mouse Receiver LED Activity
The green status LED indicates three modes:
Active: The LED is on when the mouse is being used.
Waiting: The LED blinks when the mouse is waiting to receive incoming data.
Sleep: If there is no mouse activity for eight seconds, the system goes to Sleep | Status LED | ||||
mode and the LED is off. | |||||
|
| ||||
|
|
|
| ||
| Note! | In Sleep mode the Wireless Mouse is powered down and battery power is conserved. Moving | |||
|
| the mouse or clicking on a button instantly brings it back to Active mode. |
|
| |
|
|
|
|
| |
Installing the Mouse Software
Before you can take advantage of the many features your mouse offers, you must install the driver. The driver is on the installation diskette that came packaged with your mouse.
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com
