ADIC 4000 Front Panel Controls and Indicators, Model Sustained Maximum, Model Drive Model

Table 2-2	Transfer Rate (Compressed Mode)
Model		Sustained		Maximum			Maximum
				(Write Operation)			(Read Operation)
4000DLT		3.0 MB/sec		3.0 MB/sec			3.5 MB/sec
7000DLT		10.0 MB/sec		10.0 MB/sec			10.0 MB/sec
		The removable tape media cartridge allows long-term off-line
		and/or off-site data storage. The tape media is rated at up to
		500,000 passes and has a shelf life of up to 30 years providing
		superior media durability and data reliability.
		Table 2-3 on page 2-4 lists the drive models used in the
		4000/7000DLT Series. Tape density is selected either from the
		drive front panel or the host. The 4000DLT, and 7000DLT
		drives can read/write 2.6, 6.0, and 10.0 GB formatted tapes for
		100% interchange compatibility with earlier DLT drives.
		Table 2-3		Drive to Model Identification
			Model			Drive Model
			4000DLT		DLT4000
			7000DLT		DLT7000

The 4000/7000DLT Series includes Flash EEPROM technology that allows easy on-site installation of firmware updates from tape or from the host.

The 4000/7000DLT Series includes embedded diagnostic software that tells you when head cleaning is required, diagnostic results, and drive operating status. The drive has embedded data logging of errors for failure analysis.

Front Panel Controls and Indicators

Figure 2-1 on page 2-5, and Figure 2-2 on page 2-6 show the controls and indicators located on the front panel of the 4000/7000DLT Series.

2-4 Description

62-0162-01