FLOOR PROTECTION
It is recommended that this appliance is installed on a solid, level, non combustible hearth conforming to current Building Regulations.
Fig.7
The appliance is suitable for continuous operation on solid mineral fuel and intermittent operation on wood logs. This appliance has been tested using seasoned wood logs and manufactured briquetted smokeless fuel (Ancit) for closed appliances, sized between 20g and 140g. Other fuels are commer- cially available. Wood logs up to 400 mm long are suitable. All fuels should be stored under cover and kept as dry as possible prior to use.
LOCATION
There are several conditions to be considered in selecting a location for your Berrington Stove.
a.Position in the area to be heated- central locations are usually best.
b.Allowances for proper clearances to combustibles.
Note: Sufficient space should be given around the back and sides of the stove to allow access to the air control damper.
INSTALLATION CLEARANCES
Maintain at least the following clearances to all combustible material:
From the front | 900 mm |
From the Sides | 150 mm |
From the rear | 150 mm |
From the flue pipe | 600 mm |
5
