Agilent Technologies 8935 series e6380a manual Changing the Increment or Decrement Setting

Operating Overview

Changing the Increment or Decrement Setting

Changing the Increment or Decrement Setting

Specifying An Increment Value for the Arrow Keys or Knob

The Incr Set key is used to assign a specific increment value. The increment value may use different units than the field you are incrementing/decrementing. For instance; if the RF generator’s Amplitude setting is displayed in dB ∝ V, you could increment in units of dB or mV.

To change the increment/decrement value

Step 1. Move the cursor to the numeric entry field to be changed.

Step 2. Press Incr Set, and enter the desired incremental value and unit-of-measure using the DATA ENTRY keys.

Step 3. Use the down-arrow and up-arrow keys or cursor control knob to increment the field’s value. The field’s value changes by the value you set for each key press or knob click.

Using the Factor of 10 Increment/Decrement Keys

The Incr⋅ 10 and Incr ⎟ 10 keys change the increment/decrement value by a factor of 10.

For example, if you set the increment for Tune Freq to 10 MHz for every click of the knob or push of the down-arrow or up-arrow keys, pushing Incr ⋅ 10 changes the increment value to 100 MHz.

64 Chapter 3

C:\Spk\Ref\RefGuideRevE\Opoverv.fm