Take Apart | Logic Board - 21 | |
| 1 Swing out the handle |
|
| from its storage | |
| position. | |
| 2 Pull out the logic board. | |
| Note: When installing | |
| cards, cover the two screws | |
| (for fan support and ground | |
| thermistor mounting) with | |
| tape. These screws are below | |
| the upper chassis, in the | |
| area of the logic board. | |
| Stretching a length of | |
| strong tape (fiber- | |
| reinforced, if possible) | |
| from front to back over the | |
| screws protects cables from | |
| damage. | |
