Axis Communications AXIS 2420 user manual Physical Description, Front Panel

AXIS 2420 User’s Manual Physical Description 9

Physical Description

Please read the following information to familiarize yourself with your AXIS 2420, making particular note of where the connectors and indicators are located. This section provides a useful reference when installing the product.

Front Panel

Status Indicator

Used in conjunction with the Focus Assistant, this multi-colored indicator can be used as a local focusing aid (see Focusing Your Camera, on page 17). Under normal conditions, however, this indicator defines the operational status of the camera, as described below:

•Green - the indicator flashes briefly and momentarily displays orange during the start-up and self-test routines. The indicator then displays green to indicate a healthy unit status.

•Red - the indicator will display red only if a problem with the AXIS 2420 has occurred. Refer to Appendix A - Troubleshooting.

Note: The Status Indicator can also be made to flash whenever images are displayed in a browser. See the on-line help for more information.

CCD
Used for capturing		Lock Ring
images, the charge-
	Fasten the lock ring to
coupled device is
	the chassis. Adjust the
very sensitive to dirt
	CS mount ring only if
and dust.
	you wish to adjust the
	back focus. See Adjust-
CS Mount Ring	ing the Back Focus, on
	page 59 for further
Accommodates any	details.
CS-type lens, or
C-lens (when used
with an appropriate
CS-C adaptor).		Serial Number
	Located on the
Control Button	underside of the AXIS
Located to the left of the lens assembly; this button is recessed within the product	2420, the serial num-
casing. Using a pointed object, press this button to restore the factory default set-	ber is identical to the
tings as described in The Factory Default Settings, on page 30; and to enable the	Ethernet address of
Focus Assistant, as described in Using The Focus Assistant, on page 55.	the unit.

Important!

If you are using the AXIS 2420 in an outdoor application, it must be housed in a weatherproof enclosure and must be fitted with a DC-Iris lens to automatically regulate the amount of light entering the cam- era. Prolonged exposure to direct sunlight or halogen light will damage the CCD. Consequently, Axis rec- ommends observing extreme caution when installing the camera in strong sunlight. Failure to do so may invalidate the product warranty. The AXIS 2420 W/Lens is supplied with a DC-Iris lens as standard.