Port Mirroring
Port mirroring is a method to monitor traffic in switched networks. This is accomplished by mirroring the traffic going in and out of the monitored ports to a specifically designated port (the mirror port).
1.Port Mirroring Mode: Sets the mirror mode. Select disable to disable port mirroring. Select TX to monitor data being transmitted by a port. Select both to monitor port data being transmitted and received by a port. The default value is “Disable”.
2.Analysis Port: This is the port used to see all monitored port traffic (This port can be connected to a LAN analyzer or Netxray).
3.Monitor Port: Check the box to monitor the port. Up to 4 ports can be designated as monitor ports.
[NOTE]
If the configuration is not saved, it will be lost when the port is powered off.
Port Mirroring interface
24 | Manual Documentation Number: | |
| ||
| B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | |
| B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 | – Fax +353 |
