Brother HE 120 FInstall the twin needle, JTurnstitch.on the sewing machine and select a, Press

SE-BrotherE_sgml.book Page 32 Monday, June 30, 2003 3:44 PM

GETTING READY ————————————————————————————————————————————

eInsert the thread cassette (with the extra spool pin attached) into the thread cassette compartment.

•For more details, refer to step e in "Using the extra spool pin" (page 29).

XPass both threads through the needle bar thread hooks.

•If the thread cassette is inserted with the twin needle attached, the sewing machine may be damaged.

fInstall the twin needle.

•For details, refer to "Replacing the needle" (page 37).

gManually thread the left needle with the thread for the left side of the stitch.

•For details, refer to "Thread the needle manually (without using the needle threader)" (page 30).

hRemove the thread for the right side of the stitch from only the lower hook of the needle bar thread hooks, and then use it to thread the right needle.

iAttach zigzag foot "J".

•For details on changing the presser foot, refer to "Replacing the Presser Foot" (page 40).

CAUTION

●When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged.

jTurnstitch.on the sewing machine and select a

•For stitch selection see "Selecting stitching" (page 47).

•See "Stitch Settings" (page 66) for stitches that use a twin needle.

CAUTION

●When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.

kPresspanel. (Settings key) in the operation

XThe settings screen appears.

lPress .

X displays in reverse highlight.

• If pressed again, it returns to .

XThe twin needle can now be used.

32