To the SMS menu To exit and return to idle mode at | BT 3205

5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 50

BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980

50 SMS Text Messaging

Memory full

Up to 50 SMS text messages can be stored before the memory becomes full.

If you have no unread messages

you can press	SM	as a short cut
	S

to the SMS menu.

To exit and return to idle mode at

any time, press	SM .
	S

6.Press again to send. The display shows Sending SMS followed by Message sent.

SMS message memory full

When the SMS memory is becoming full, Memory Full will flash in the display.

When the SMS memory is completely full, Memory Full is permanently displayed.

You must delete messages before you can receive or write any new ones.

To delete individual messages

1.Press until SMS is displayed. Then scroll to Inbox

or Outbox and press .

The message list is displayed, starting with the newest message.

2.Use or to scroll to the message you want to

delete, then press . The message is displayed.

3.Press then press to select Delete.

4.Press , the display shows Delete? Confirm?.

5.Press to confirm.

Image 50

BT 3205 manual To the SMS menu To exit and return to idle mode at

Contents

User Guide Welcome… BT Synergy 3205 UG 2-2 23/3/04 203 pm This guide Getting started Environmental Using SMS Guarantee SafetyGeneral To subscribe to the SMS Cleaning Dialling mode Getting started Handset range Your BT Synergy 3205 SMS is now ready for use Attaching the belt clip optional Getting to know your phone Handset buttons Base Display icons This is where the icons will appear Synergy Scroll and to select volume to confirm Navigating the menus Menu map SMS Using the phone Call timer Using the phone Handsfree Redial Secrecy Paging Phonebook Now either press Press Number is displayed, enter the telephoneNumber and press To return to standby Using the phone Baby call Room monitor mode To switch baby call off Press twice Press to scroll to Off BT Synergy 3205 UG 2-2 23/3/04 210 pm Handset settings Set time and date Ringer volume Press then to display Handset Menu and press Keypad lock To confirm Press to scroll to Handset Name and pressPress To delete the current name and then use Base settings Select a base Default settings Your BT Synergy 3205 is now reset to its default settings Pause after picking up line Handset and base default settings areHandset & base ringer volume Internal and External handset Caller Display and Call Waiting Caller Display Shows Name Press Again to return to your first caller Call WaitingSecond caller Additional handsets & bases Automatically selected and shown on the display Press Then scroll To Setup and pressEnter For the base you want to register to De-register handsets Additional handsets & bases Until Internal Call is displayed Internal callsTransferring calls Handset priority Additional handsets & bases SMS Text Messaging Welcome to the SMS Text Messaging service on yourCost of the fixed line service For example, to type the word ‘sirs’ Standard method Using SMSFasTxT predictive texting Button Character Copy of the message is kept in the Outbox Enter the number you want using the keypadPress to confirm the message. The display shows Message to Press Again to send. The display shows Sending Receiving an SMS message Once registered, SMS message delivery is 24 hours To read new SMS messages SMS Text Messaging SMS Text Messaging To the SMS menu To exit and return to idle mode at SMS Service Centre numbers These numbers have been pre-loaded into the BT Synergy Messages 9 Send To change the SMS Centre phone numbers Help Or replace them if necessary If using more than one base, check that you areCharging properly Switched on Connected to the correct base. See Option in the base Problems Possible causeFitted Cannot adjust an Possible problems with SMS You receive an incoming call Help That message, e.g Recipient may have an SMS enabled phoneTurns off permanent voice text message delivery Safety information General information General information Guarantee BT Synergy 3205 UG 2-2 23/3/04 208 pm Technical information TTE Connecting to a switchboard Declaration of Conformance Scroll to Pause Setup and press Date of purchase Place of purchase Serial number Ofﬁces worldwide