Canon 30D1785, 30D28135 manual Charging the Battery Pack, Connect the power cord, Remove the cover

Charging the Battery Pack

1 Connect the power cord.

● Connect the power cord to the compact power adapter.

● Insert the plug into a power outlet.

2 Remove the cover.

● Store the cover in a place where it will not be lost.

● If you remove the battery from the camera, be sure to reattach the cover to protect against shorting.

	3	Place the battery in the adapter.
〈 – 〉 mark		● Align the end of the battery with the 〈 – 〉 mark
		on the adapter, press down on the battery,
		and slide it into place.
		● To remove the battery, use the reverse of
		the above.
		● Batteries can be charged in either the left
		or right side of the adapter.

1

Before You Begin

Battery charge	Charge lamp
0–50%	Blinks once per
	second
50–75%	Blinks twice per
	second
Over 75%	Blinks three times
	per second
100%	Stays on

4 Charge the battery pack.

As soon as you place the battery pack in the compact power adapter, the charge lamp starts blinking and charging begins. When charging is complete, the lamp stops blinking and stays on.

It can take up to 90 minutes to fully charge a battery pack.

●You can check whether a battery is charged by seeing whether the charge lamp blinks or stays on.

When charging is complete, the charge lamp stops blinking and stays on. You can continue charging the battery for approximately an hour to reach full charge capacity.

●When charging is complete, remove the battery and unplug the power cord from the outlet.

25