Cisco Systems RVS4000RF Network Setting Status, Firewall Setting Status, IPSec VPN Setting Status

Setting Up and Configuring the Router	5
Setup

Network Setting Status

LAN IP The IP address of the router’s LAN interface.

WAN IP The IP address of the router’s WAN interface. If this address was assigned by using DHCP, click DHCP Release to release the address, or click DHCP Renew to renew the address.

Mode The operating mode, Gateway or Router.

Gateway The Gateway address, which is the IP address of your ISP’s server.

DNS 1-2The IP addresses of the Domain Name System (DNS) server(s) that the router is using.

DDNS Indicates whether the Dynamic Domain Name System (DDNS) feature is enabled.

DMZ Indicates whether the DMZ hosting feature is enabled.

Firewall Setting Status

DoS (Denial of Service) Indicates whether the DoS Protection feature is enabled to block DoS attacks.

Block WAN Request Indicates whether the Block WAN Request feature is enabled.

Remote Management Indicates whether the Remote Management feature is enabled.

IPSec VPN Setting Status

IPSec VPN Summary Click the IPSec VPN Summary hyperlink to display the

VPN > Summary window.

Tunnel(s) Used Displays the number of VPN tunnels currently in use.

Tunnel(s) Available Displays the number of VPN tunnels that are available.

Log Setting Status

Email If this displays Email cannot be sent because you have not specified an outbound SMTP server address, then you have not set up the mail server. Click the Email hyperlink to display the Administration > Log window where you can configure the SMTP mail server.

Cisco RVS4000 Security Router with VPN Administrator Guide 28