Cisco Systems SOHO 71 manual Connecting a Server, PC, or Workstation

Chapter 2 Installation

Installing Your Router

Connecting a Server, PC, or Workstation

Before connecting the server, PC, or workstation, see Table 2-2to determine how to set the router TO HUB/TO PC button.

To connect one of these devices to ETHERNET port number 4, follow the steps in Figure 2-2. (Figure 2-2shows a Cisco 806 router, but the process is the same for a SOHO 71 router.)

Figure 2-2 Connecting a Server, PC, or Workstation

1. Set TO HUB/TO PC button.

					Cisco 806 router
	TO HUB ETHERNET	10BASET		Model Cisco
2. Connect yellow cable	TO PC		COMPUTERS (E0)			806
	4	3	2	CONSOLE			+5 VDC
						ETHERNET 10BASET
to ETHERNET port 4			1
						INTERNET (E1)
on Cisco 806 router.
							PC

51817

3.Connect other end of cable to server, PC, or workstation.

Note Leave the PCs you connect to the router turned off until you have completed router installation.

You can connect additional servers, PCs, or workstations to ETHERNET ports 1, 2, and 3.

Cisco 806 Router and SOHO 71 Router Hardware Installation Guide

2-8 78-10432-04