Cisco Systems VR-561 manual Show controllers timeslots, Tl/e1, Timeslots, VR-695

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show controllers timeslots

show controllers timeslots

To show the channel-associated signaling (CAS) and ISDN PRI state in detail, use the show controllers timeslots command in privileged EXEC mode.

show controllers t1/e1 controller-numbertimeslots timeslot-range

Syntax Description

Defaults

Command Modes

Command History

tl/e1	Specifies the type of interface.
controller-number	Specifies the controller number of CAS or ISDN PRI time slot. Range 0
	through 7.
timeslots	Displays DS0 information.
timeslot-range	Specifies time slot range 1 through 31 for E1, 1 through 24 for T1.
No default
Privileged EXEC
Release	Modification
10.0	This command was introduced.
12.1(3)T	The timeslots keyword was added.
12.1(5)T	Support for Cisco AS5400 universal access servers was added.

Usage Guidelines Use the show controllers t1/e1 timeslots command to display the CAS and ISDN PRI channel state in detail. This command shows whether the DS0 channels of a controller are in idle, in-service, maintenance, or busyout states. Enter the show controllers t1/e1 command to display statistics about the T1 or E1 links.

Examples	The following example shows that the CAS state is enabled on the Cisco AS5300 universal access server
	with a T1 PRI card:
	Router# show controllers timeslots
	T1 1 is up:
	Loopback: NONE
	DS0	Type	Modem	<->	Service	Channel		Rx			Tx
					State	State		A B C D			A B C D
	-----------------------------------------------------------------------------------------
	1	cas-modem	1	in	insvc	connected	1	1	1	1	1	1	1	1
	2	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	3	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	4	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	5	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	6	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	7	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	8	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0
	9	cas	-	-	insvc	idle	0	0	0	0	0	0	0	0

Cisco IOS Voice, Video, Fax Command Reference

VR-695