` 14 mac001 1200DPI 80LPI | |
|
|
Installation
Manual setup
Installation
FINE TUNING
ENGLISH
Call up Manual Setup from the Setup menu.
PROGRAMME NUMBER SELECTION
1.Position a selection bar to PR.
2.Press the LEFT/RIGHT buttons to select a programme number you want.
TV SYSTEM SELECTION
Picture
Sound
Features
Setup
Manual setup
PR | 4 |
|
|
CH | C 5 |
Name | RTL - 2 |
System | BG |
Colour | PAL |
Search |
|
Fine tune |
|
If you are unable to get a good picture or sound because of a poor broadcast signal, it is possible to adjust the fine tuning.
1.Move the selection bar to Fine tune.
2.Press the RIGHT or LEFT button to activate fine tuning up or down.
It operates while the RIGHT/LEFT button is being pressed.
The change is stored automatically.
F i n e T u n e
0
- 
+
Adjust
If necessary, you can change the TV System.
1.Position a selection bar to System.
2.Select the TV system with LEFT/RIGHT button.
BG : West and North Europe, Australia, N/Zealand,
DK : East Europe, CIS, China, Vietnam
I: Great Britain, Ireland, Hong Kong,S/Africa L : France, Switzerland
NOTE : The L is displayed only when you had selected the Country “F”or “CH” in Auto setup.
CHANNEL SEARCH
Select | Adjust | Exit |
ENTER A STATION NAME
You can change an existing name, or enter a name where none exists.
1.Move the selection bar to Name.
2.Press the RIGHT buttons to call up the Name menu.
3.Select the position with UP/DOWN button.
4.Use the LEFT/RIGHT buttons to select the desired character :
A B C ... Z +
P i c t u r e | N a m e |
|
Sound | Name | R T L - 2 |
Features | 1 | R |
Setup | 2 | T |
3L
4-
52
Select | Adjust | Exit |
Up/Down Search
1.Position the selection bar to Search.
2.Press the RIGHT or LEFT button to search up or down. Searching will stop at the next channel found and then the channel will be stored automatically.
Search
C10 
PR12
Please wait!
Search 
Exit
COLOUR STANDARD SELECTION
If necessary, you can change the Colour standard.
1.Position a selection bar to Colour.
2.Use the LEFT/RIGHT buttons to select the desired
Colour standard : PAL 
SECAM 
Direct Search
You can directly locate a program by entering the channel number.
1.Position the selection bar to CH.
2.Select a channel with LEFT/RIGHT button.
The selected channel will be stored automatically.
NOTE : In the AV mode
PAL 
SECAM 
AUTOM
14 | 15 |
