Delta Electronics manual Ethernet Communication Module DVPEN01-SL

Ethernet Communication Module DVPEN01-SL

6.To clear the password, simply leave the password columns blank. Click on “OK” to clear the password.

7. After the password is cleared, you can modify the parameters.

6.5When the Password is Lost (Returning to Default Setting by RS-232)

Application

Network requirement

Returning to default setting by RS-232

(1)DVPEN01-SL is set with a password.

(2)The password is forgotten.

1.Use DVPACAB2A30 cable to connect the PC and DVPEN01-SL and open the setup page. Open the “reset to default setting”” pages. Click on “Unlock”.

DVP-PLC Application Manual 39