Dialogue Tech NANO-PV-D510A user manual Serial Device Connection, 17 PS/2 Keyboard/Mouse Connector

NANO-PV-D510A User Manual

Figure 4-17: PS/2 Keyboard/Mouse Connector

Step 3: Connect the keyboard and mouse. Connect the keyboard and mouse to the

appropriate connector. The keyboard and mouse connectors can be

distinguished from each other by looking at the small graphic at the top of the

connector.

4.7.3 Serial Device Connection

The NANO-PV-D510A has a single female DB-9 connector on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the NANO-PV-D510A.

Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 3.

Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See Figure 4-18.

Page 57