Elinchrom 2 IT, 4 IT Digital multi-display, Sychronisation socket, Open flash «test», 400

Digital multi-display English

The fllash / modelling lamp power is displayed in f-stop compatible formats from 2.0 – 6.0 for D-Lite it 4 / 400 ws. The fllash power difference from (e.g.) 5.0 – 6.0 is 1f-stop.

The power range is 5 f-stops, variable in 1/10th intervals. During charging or discharging, the display «fllashes». In case of overheating or malfunction, the display shows “E” for error followed by the error code number.

Display	2.0	3.0	4.0	5.0	6.0
Joules / Ws	25	50	100	200	400

Note: The «D-Lite 2 it - D-Lite 4 it» units have an integrated discharge system, protected by a thermal switch. To avoid overheating, discharge manually with the «test» button if you want to decrease the power for more than 2f-stops.

Sychronisation socket

Standard socket with 3.5 mm mini-jack (5).

N.B. Do not link ELINCHROM units by cable to other manufacturers sync. outlets. ELINCHROM uses low voltage (5 V) for security reasons.

5

Sync

Open flash «test»

Having pressed the touch pad to release a flash, the green «READY» light	Test and Ready (4)
will appear again once the unit is recharged. If the green light does not
appear the charge system could be defective.
Please contact an authorized Elinchrom service centre.

Eye-Cell – advanced photocell sensor

The standard photocell can be remotely triggered by another flash unit!

The D-Lite it photocell is specially designed to work in studio light conditions Direct light or other strong light sources may reduce the sensitivity of the cell.

9