Elo TouchSystems 2401LM user manual On-Screen Display OSD

(for example images containing small-font text).

Your Touchmonitor will likely not require video adjustments. However, for analog VGA video, variations in video graphic card outputs may require user adjustments through the OSD to optimize the quality of the Touchmonitor’s displayed image. These adjustments are “remembered” by the Touchmonitor. Also, to reduce the need for adjustments for different video mode timings, the monitor correctly scales and displays some of the video industry’s most common video timing modes. Refer to the technical specifications for this monitor at http://www.elotouch.com for a list of these Preset Video Modes.

On-Screen Display (OSD)

Four OSD buttons are on the bottom of the monitor. These can be used to adjust various display parameters.

The buttons and their functionality are:

Button	Function when OSD is not displayed:	Function when OSD is displayed:
Menu	Display OSD main menu	Return to previous OSD menu
	Display OSD Contrast submenu	Increase value of selected parameter /
		select next menu item
	Display OSD Brightness submenu	Decrease value of selected parameter /
		select previous menu item
Select	Enter“Auto Adjust” feature(VGA mode only)	Select submenu to enter

Using the OSD buttons controls an on-screen graphical user interface which displays on top of your input video, allowing intuitive adjustment of the following display parameters:

	Parameter		Available Adjustment
Contrast		Increase/decrease monitor contrast.
		Default: best gray-shade performance
Brightness		Increase/decrease monitor brightness.
		Default: maximum
V-position		Moves the image vertically on the display in single-pixel increments.
		Default: centered.
		Only applicable for VGA input video
H-position		Moves the image horizontally on the display in single-pixel increments.
		Default: centered.
		Only applicable for VGA input video
Recall		Selecting “Recall Defaults” restores all factory default settings for OSD-adjustable
Defaults		parameters (except OSD Language) and for Preset Video Mode timings.
				User Manual 2401LM
	© 2013 Elo Touch Solutions, Inc. All rights reserved.			SW200127 Rev A - Page 20 of 32