Command Reference Guide 25
Set Prompt
Specify the prompt displayed when the printer server is in local mode and awaiting a printer server command.
>Server>> set server prompt “prompt”
“prompt” Enter 1 to 8 characters, enclosed in quotes. The default is “server”. The printer server always adds the string “>>“ after the prompt in privileged mode or “>“ when not in privileged mode. The RCF port will always display Local>.
Modify SNMP
Add or modify entries in the SNMP table or change the printer server’s SNMP trap host IP address.
>Server>> [set define change] server snmp com_name access acc_right [trap IP ip_addr] [set] [enabled disabled]]
com_name The name of an SNMP community.
acc_right | Specifies access privileges associated with the |
| community name: read, write, or read/write. |
trap | Establishes a trap host to receive messages |
| from the printer server. |
ip_address | Enter the IP address for the workstation that will |
| receive SNMP trap messages from the printer |
| server. The IP address must be entered in |
| decimal dot notation. For example, |
| 123.234.345.490. The |
set | Allows an SNMP manager to perform set type |
| operations on the printer server. |
enabled | If enabled, SNMP set requests will be accepted. |
disabled | If disabled, SNMP set requests will be rejected. |
