EXPLODED VIEW S.I.T PILOT ASSEMBLY
To remove pilot injector:
Remove the two screws that hold the pilot assembly to the burner control assembly.
Lift the assembly straight up being careful not to damage any components.
Using a 10 mm wrench undo the securing nut on pilot tubing and pull tubing down to access injector. Being careful not to damage the ceramic spark electrode.
Replace the injector and reinstall the pilot tubing, always to perform a gas leak test before lighting the pilot assembly.
The number on the side of the injector will determine the size. This number is in millimeters.
PILOT HEAD
THERMOPILE
PILOT INJECTOR
SPARK ELECTRODE
THERMOCOUPLE
|
|
|
|
|
| Sherwood Industries Ltd. | ENVIRO | PAGE 4 |
|
|
|
|
|
|
