Exmark 850 manual Product Overview, Operation, Emptying the Grass Bags

Operation

Product Overview

Figure 4

1.	Hood	3.	Upper flexible tube
2.	Bag	4.	Lower tube

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Emptying the Grass Bags

Be careful when lifting or handling a grass bag that is full. To empty the grass bags:

1.Move the motion control levers outward to neutral position, disengage the power take off (PTO), engage parking brake, stop the engine, remove the key, and wait for all moving parts to stop before leaving the operating position.

2.Open (raise) the hood.

3.Compress debris into the bags. With both hands, lift up on the bag and unhook it from the retaining bracket. Empty the bag. Repeat the procedure for the other bag.

4.Install the bags by sliding the bag frame hook onto the retaining bracket (Figure 5).

Figure 5

1. Bag frame hook 2. Retaining bracket

5. Lower the hood onto the bags.

Clearing Obstructions from the Bagger

1.Move the motion control levers outward to neutral position, disengage the power take off (PTO), engage parking brake, stop the engine, remove the key, and wait for all moving parts to stop before leaving the operating position.

2.Check the grass bags and empty them if they are full.

3.Remove and separate the discharge tube and chute from the bagger hood and mower. Using a stick or similar object, carefully remove and clear

10