Installation and Operation, cont’d

NThe PMK 300 has a hole in the bottom plate that allows the projector pole to be inserted through the center of the plate (figure 2-6), rather than outside of the plate (figure 2-5). To install the PMK 300 in this configuration, slide the bracket up from the bottom of the pole before the projector is installed on the pole.

Bracket

Brace

U-Bolt

Extron

PMK 300

 

Multi-product Projector

Mount Kit

Figure 2-6 — Projector pole on the inside

4.

Place the contoured bracket brace against the pole and

 

opposite the back plate. The pole should fit snugly into the

 

depression in the center of the bracket brace.

5.

Place the U-bolt around the ceiling pole. Insert the

 

two legs of the U-bolt through the round holes on the

contoured bracket brace and then through the slotted holes on the bracket’s mounting plate.

NThe supplied U-bolt fits a typical (1.5" to 2.0" diameter) ceiling pole.

6.

Secure the bracket to the U-bolt with the included hex

 

nuts, washers, and lock washers. Tighten the hex nuts just

 

enough that they can be loosened by hand.

PMK 350 mounting

Mount the receiver to a PMK 350 bracket as follows:

1. Remove the front and rear plates from the PMK 350 (figure 2-7), using an Extron Tweeker or a #2 Philips screwdriver. Retain the screws to reattach the plates when you are finished.

 

Extron

Rear Plate

Quarter-rack

 

Sized Product

 

Contoured

 

Base

 

L-shaped

 

Bracket

Extron

U-bolt

PMK 350

 

Multi-product Projector

 

Mounting Kit

 

 

Extron

 

Power Supply

 

Front Plate

Cover Sheet

Figure 2-7 — PMK 350 projector mounting a receiver

2.

If necessary, remove the feet from the bottom of the

 

receiver.

3.

Secure the receiver to one side of the mounting tray,

 

using two of the supplied 4-40 x 3/16" screws in opposite

 

(diagonal) corners.

4.

If power supply is connected to the receiver, use the

 

two included tie wraps to strap the power supply to the

 

bracket.

5.

Place the PMK 350 around the projector ceiling mounting

 

pole (figure 2-7).

2-8

HDMI 201 Tx/Rx • Installation and Operation

HDMI 201 Tx/Rx • Installation and Operation

2-9

Page 12
Image 12
Extron electronic HDMI 201 Tx/Rx user manual PMK 350 mounting, If power supply is connected to the receiver , use

HDMI 201 Tx/Rx specifications

Extron Electronics has consistently been at the forefront of providing high-quality professional AV solutions, and their HDMI 201 Tx/Rx model stands as a testament to this legacy. Designed for superior performance in distributing HDMI signals, the HDMI 201 Tx/Rx offers a reliable solution for any professional installation environment, such as classrooms, conference rooms, and commercial spaces.

One of the standout features of the HDMI 201 Tx/Rx is its ability to extend HDMI signals beyond typical limitations. With support for high-definition video up to 1080p and audio formats, it ensures that users experience pristine image quality without degradation. This model can extend signals up to 200 feet (60 meters) over a standard category cable, allowing for flexible installations without compromising quality.

The HDMI 201 Tx/Rx utilizes advanced technologies including Extron's unique engineering that incorporates built-in EDID management. This feature simplifies configuration by allowing the transmission of data between display devices and source components, ensuring compatibility and optimal performance. Additionally, the device supports a wide range of video resolutions and audio formats, making it adaptable for various applications and user needs.

Another remarkable characteristic is the HDMI 201's compact and robust design. The unit is housed in a sturdy enclosure, making it suitable for rack mounting or placement in tight spaces without sacrificing performance. Furthermore, the Transmitter and Receiver are powered via a single power supply, facilitating easier installation and reducing clutter.

The Extron HDMI 201 Tx/Rx also features a user-friendly interface, with LED indicators that provide clear status information at a glance. This allows AV managers and technicians to quickly troubleshoot connection issues and monitor the system's performance, enhancing reliability and ease of use.

In conclusion, the Extron HDMI 201 Tx/Rx is a powerful solution for the transmission and extension of HDMI signals in professional settings. With its exceptional video and audio support, advanced features like EDID management, compact design, and user-centric interface, it represents a commitment to quality and innovation in the realm of audio-visual technology. This makes the HDMI 201 Tx/Rx an ideal choice for any AV professional seeking to enhance their installations and deliver superb content quality.