Leveling Door with Adjustable Hinge
Use the lower hinge adjustment to fine tune the door height and for final cabinet spacing. Use a 7/16” socket or wrench to adjust the screw at the bottom of the lower hinge.
Adjusting Doors for Matching Tall Refrigerator/Freezer Pair
The doors may also be adjusted side to side with the slotted hinge for aligning the doors parallel to each other. Loosen the two bolts with a 3/8” wrench and one screw with a Phillips screwdriver. Shift the doors until parallel, then retighten the screw and bolts securely. (See illustration below.)
Lower Hinge Adjustment for Leveling the Doors of the Matching Tall Refrigerator/ Freezer Pair
To level the doors using the adjustable lower hinge (some models):
1.If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16” socket wrench. (See illustration below.)
2.If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16” socket wrench. (See illustration below.)
Door | Slotted Hinge | Door |
Adjustment | ||
| ⅜” bolts |
|
Raise |
| Raise |
Door |
| Door |
Screw
FreezerRefrigerator
To install the shelf grommet to the shelf:
1.With the wire shelf installed, press the shelf grommet down onto the wire that is anchored into the freezer wall. Be sure to keep the larger end of the shelf grommet away from the wall.
INSTALLATION
2.Push the shelf grommet onto the wire until it snaps in place.
3.Slide the shelf grommet into the grommet already in the freezer wall until it is flush.
7
