GarrettCom Magnum 6K32T Four-Port 10 Mb mm Fiber ST Modules, @RJ-45 + 2@ 100Mb, ST or SC

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

2.2.4Six-Port “4 + 2”Combo Modules, 4@ 10/100 RJ-45 and 2@100Mb

fiber 4@RJ-45 + 2@ 100Mb

	1		3	5	7
10/100						LK
F/H						ACT
ACT			ACT
F/H			F/H
2	TX	LK RX	6	TX	LK	RX

	1		3	5	7
10/100						LK
F/H						ACT
ACT			ACT
F/H			F/H
2	TX	LK RX	6	TX	LK	RX

ST or SC

The combo six-port modules are combinations of copper and fiber media, available as four 10/100 switched RJ-45 copper ports and two 100Mb switched multi-mode fiber ST, SC or single mode SC or Long Reach SC ports. For ports numbering, ports 1,3,5,7 are copper, ports 2 and 6 are fiber, ports 4 and 8 are not present.

The four RJ-45 ports operate just like the 8-port copper module with auto-cross (MDIX) feature to eliminate the use of cross-over cable, and the two fiber ports operate at 100Mbps full-duplex (default). User mode control per port through the MNS software is also the same.

On Magnum “4+2” Combo modules, there are four LED’s for each RJ-45 port, which indicate status the same as described for the 6K8-RJ45 in Section 2.2.3 above. The fiber port’s LEDs indicate status the same way as described for the SFF fiber modules in Section 2.2.2 above. Color-coding on the panel of the module shows which LEDs belong to which port.

	1		3	5	7
10/100						LK
F/H						ACT
ACT			ACT
F/H			F/H
2	TX	LK RX	6	TX	LK	RX

The Magnum Combo six- port modules are also available with 4@ MTRJ 100Mb mm SFF fiber and 2@10Mb fiber mm ST ports, and with 4@ RJ45 10/100 copper and 2@10Mb fiber mm ST ports. The

4@ RJ-45 + 2@ 10 Mb ST operation of the SFF fiber and the RJ-45 half of the module is as described for those port types above. For detailed information about 10Mb mm ST fiber half of the module, see Section 2.2.5.

2.2.5	Four-Port 10 Mb mm Fiber ST Modules
	ACT			ACT
	F/H			F/H
	1	TX	LK RX	5	TX	LK RX
	ACT			ACT
	F/H			F/H	T	LK R
	2	TX	LK RX	6
www . GarrettCom . com

12