Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC | Revised 02/20/08 |
COMFORT SETTINGS
Adjusting the seat with a front to rear angle
Bottom of
Seat
Seat
Guide
Adjusting
Bolts
Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger bag and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the lowest position and insert the ball detent pins through the towers and seat receiver legs. Leave the seat guide adjusting bolts loose. Slide the seat into the receivers, adjust seat to the desired height and angle using the (4) detent pins. Leave the seat in the seat receivers and tighten the seat guide adjusting bolts. This process is more easily accomplished with two people. Note: seat receivers must be 2” higher when using NF22 battery cover.
Seat Guides
Seat Angle
Adjusting Pins
Front Seat Locking
Handle
Seat
Tower
17
