MAINTENANCE
The GTO Slide Gate Operator is designed for minimum maintenance. However, for optimum performance and safety, the following maintenance procedures should be taken:
GATE
Having a well maintained gate will ensure that the operator runs smoothly and safely. Make sure gate is hung level and plumb. Check and adjust periodically. Lubricate rollers periodically with grease appropriate for the
coldest weather in your area.
SAFETY EDGES
Periodically test the safety edges to make sure they are functioning correctly. If they are not, discard and replace immediately.
CONTROL DEVICES
From time to time, check to ensure that all of the control devices connected to the operator are functioning. This is especially important for safety devices.
OPERATOR
Occasionally inspect the chain to ensure that it is well lubricated, and oil the chain as necessary. Use CHAIN AND CABLE LUBE for best results. Check the gear sprockets and grease them as needed. Check the rollers and spray oil on them as needed.
28
