4Type following commands:
AT*Vn=1 <ENTER>
where n is the number of the analog device.
5Save the new settings so that they are available every time you start the DIVA T/A. Type the following command:
AT&Wn <ENTER>
where n is the number of the Profile (0, 1, or 2) to which you want to save.
6To restart the DIVA T/A, type:
Type ATZn <ENTER>
where n is the number of the profile number (0,1 or 2) you want to be active.
VoiceMail is enabled but your message waiting indicator light doesn’t go on when you have messages in your VoiceMail box.
The DIVA T/A hardware you are using may not support the message waiting indicator light. To check if the DIVA T/A you are using supports this feature, follow these steps:
1Start the
2Confirm you are connected to the DIVA T/A by typing AT and pressing Enter. The DIVA T/A should respond with “OK”.
3Type ATI20 and press Enter. The version number for your DIVA T/A hardware
•
•
If your DIVA T/A hardware supports this feature and it is still not working, check with your ISDN provider to find out if the “Message Waiting Indicator” key is set to the appropriate value. See “Feature Key Values” on page 102 for more information.
