HP 7000 dl Router manual Clear lldp neighbors, Enable #clear lldp neighbors

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear lldp neighbors

Use the clear lldp neighbors command to remove all neighbors from this unit’s database. As new LLDP packets are received, the database will contain information about neighbors included in those frames.

Syntax Description

No subcommands.

Default Values

There are no default settings for this command.

Command Modes

# Enable Command Mode

Functional Notes

This command generates output indicating the names of any neighbors deleted from the database and the name of the interface on which the neighbor was learned.

Usage Examples

The following example clears LLDP neighbor Switch_1 from the Ethernet interface 0/1:

>enable

#clear lldp neighbors

LLDP: Deleted neighbor “Switch_1” on interface eth 0/1

#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 42