Chassis Back Panel
The following illustration shows a
Figure 2-2 S1050F Appliance Back Panel
1Fans (3)
2AC power supply
3AC power connector
4Power switch
Chassis Features
The Chassis features include the following elements:
•”Power Switch and Power Indicator” on page 6
•”System Status Indicator” on page 6
•”Alert Indicator” on page 6
•”Fans and Power Supplies” on page 7
•”External Storage Card” on page 7
•”Ports” on page 7
Power Switch and Power Indicator
The power switch is located on the right side of the back panel. The power indicator on the front panel indicates the current power status of the appliance.
•No light — Appliance is powered off.
•Green — Appliance is powered on.
System Status Indicator
The System Status indicator is located on the right side of the front panel and indicates the current operating status of the appliance.
•Flashing Green — Appliance is booting and is not yet ready to inspect traffic.
•Flashing Green/Yellow — Appliance is booting and BIOS or software is updating.
•Solid Green — Appliance is running in a healthy state.
•Solid Yellow — Appliance is running but has a health rating below the acceptable threshold.
Alert Indicator
The Alert indicator is located on the right side of the front panel and indicates the current status of the software processes and the hardware.
•Solid Green — Both the hardware and the software processes are running normally.
•Solid Yellow — System is booting. If the solid yellow indicator remains after startup, a software problem has been detected. Hardware status is undefined.
•Flashing Yellow — Hardware problem detected. Software running normally.
•Off — Appliance power is off.
6 HP TippingPoint S1000 Series
