Service And Adjustments | Husqvarna 15530SB-LS specification

Image 17

Husqvarna 15530SB-LS manual Service And Adjustments, TO REPLACE BELTS See Fig

Contents

Operators Manual 15530SB-LS Training Safe Operation Practices for Walk-Behind Snow ThrowersPreparation Operation Maintenance and Storage TABLE OF CONTENTSClearing a Clogged Discharge Chute PRODUCT SPECIFICATIONS HOW TO SET UP YOUR SNOW THROWER ASSEMBLY / PRE-OPERATIONPARTS PACKED SEPARATELY IN CARTON REMOVE SNOW THROWER FROM CARTON UNFOLD UPPER HANDLE INSTALL SPEED CONTROL ROD See Figs. 1 andINSTALL TRACTION DRIVE CONTROL ROD See Figs. 3 and INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD See Fig INSTALL AUGER CONTROL ROD See Figs. 5 and CHECK TIRE PRESSURE INSTALL CHUTE DEFLECTOR REMOTE CONTROL See Figs. 8 and KNOW YOUR SNOW THROWER OPERATION Traction drive control lever - used to engage power MEETS A.N.S.I. SAFETY REQUIREMENTSDrive speed control lever - used to select forward or Recoil auxiliary starter handle - used for starting the STOPPING HOW TO USE YOUR SNOW THROWERTO USE FUEL SHUT-OFF VALVE See Fig TO USE THROTTLE CONTROL See Fig POWER STEERING OPERATION See Fig USING THE CLEAN-OUT TOOL See FigTO THROW SNOW See Fig TO MOVE FORWARD AND BACKWARD See Fig TO ADJUST SKID PLATES See Fig BEFORE STARTING THE ENGINESCRAPER BAR See Fig TO USE DRIFT CUTTERS See Fig TO START ENGINE SNOW THROWING TIPSBEFORE STOPPING IF RECOIL STARTER HAS FROZEN GENERAL RECOMMENDATIONS MAINTENANCEBEFORE EACH USE LUBRICATION ENGINE CLEANINGBELTS AUGER GEAR CASE 1. Be sure throttle is in STOP position 2. Remove safety ignition key SERVICE AND ADJUSTMENTSTO ADJUST SNOW THROWER HEIGHT CHUTE DEFLECTOR TO REPLACE BELTS See Fig TO REMOVE WHEELS See Fig TO ADJUST CABLE TENSION See FigCARBURETOR ENGINE SPEED OTHER STORAGEFUEL SYSTEM ENGINE OIL Loss of power TROUBLESHOOTINGDoes not start Engine idles or SERVICE NOTES SERVICE NOTES SERVICE NOTES SECTION 1 LIMITED WARRANTY WARRANTY STATEMENTSECTION 2 HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY SECTION 3 ITEMS NOT COVERED BY THIS WARRANTY