IBM Magstar 3494 manual Export/Import List Volumes Failure-Reason Text, Message Code Message Text

		Table 44. Import Status Messages (continued)
	Message Code	Message Text
	I0013	IMPORT PROCESSING RESUMED, SCRATCH VOLUME MADE AVAILABLE
			This message is generated when, after the import operation was suspended because no scratch
			stacked volumes were available, scratch stacked volumes are again available and the import
			operation can continue.
			Action: None, status only.
	I0014	IMPORT PROCESSING TERMINATED, WAITING FOR SCRATCH VOLUME
			This message is generated when the VTS has terminated the import operation because scratch
			stacked volumes were not made available to the VTS within 60 minutes of the VTS need for a
			scratch volume on which to copy imported logical volumes.
			Action: Operator should make more VTS stacked volumes available, perform analysis of the
			Status File on the Export List volume, and reissue the Import operation.
	I0015	IMPORT RECOVERY STARTED
			The Import operation has been interrupted by a VTS error or a power off condition for which
			recovery is being attempted.
			Action: None, status only.
	I0016	IMPORT RECOVERY COMPLETED
			The recovery attempt for interruption of an Import operation has been completed.
			Action: Perform analysis of the Status File on the Export List volume and reissue the Import
			operation, if necessary.
Export/Import List Volumes Failure-Reason Text
			If the VTS subsystem was unable to process the Export or Import list volume, the
			host generates message CBR3858I. The reason the list volume could not be
			processed is included as a text string. The following table de®nes the
			failure-reasons returned, the probable cause and the recommended actions for the
			customer to take.
			In the table below, the symbols <VOLSER>, <File>, <Record>, and <Field> will be
			replaced in the message text as appropriate to describe the location of the error
			found:
			v <VOLSER>, the logical Volser which was provided in the Export or Import
			operation.
			v <File>, Export List File, Import List File, Reserved File or Status File.
			v <Record>, within a HDR1, HDR2, EOF1 EOF2, Identi®er or Record.
			v <Field>, within a Label Identi®er, Block Count, Record Length, Block Count, Title
			Text or Version.
Table 45. Export-Import List Volumes Failure Reason Text
	Failure-Reason Text Ð Probable cause.		Recommended Action
		Volume <VOLSER> has not been written		Operator should check for the correct identity of the
		The Export or Import operation speci®ed a Export/Import		Import/Export List Volume and, if necessary, execute the
				JCL which prepares a logical volume as the Import/Export
		List Volume which has not been created (written).		List Volume.

Appendix B. Virtual Tape Server Import/Export Advanced Function 331