IBM SY27-0345-06 manual 14T 24x Models, Connections to the Power Supply 12x Models

Figure 4-26. Connections to the Power Supply (12x Models)

2

3

Replace the spade lug terminalA ). ground (

Replace the connector to the ac B power). source (

	4 Position the			connector			to the systemC ) so boardthat	the(	side of	the con-
	nector	with		the	tabs		faces the retaining clips. Then, press firmly
	clicks into place. Be sure it is firmly seated.
Removing the Base	Power Supply		for	14T		and	24x Models
To	remove	the	power		supply:
	1Remove	the		screws that attach the power				supply	cover	to the cha
	shown	in	Figure 4-27			on	page 4-23.

4-222210 Service and Maintenance