Interlink electronic X70/X80 manual PICTURE-2 Menu, Position, Phase, Size

Multifunctional Settings (continued)

PICTURE-2 Menu

With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

memo This menu cannot be selected at a M1-D signal.

MENU

MAIN	V POSITION	20
PICTURE-1	H POSITION	142
PICTURE-2	H PHASE	31
INPUT	H SIZE	1344
AUTO	OVER SCAN	95
SCREEN	RESET
OPTION
NETWORK
: SELECT

Item	Description
	Adjust the vertical position using the	/	buttons. :
V POSITION	Up ￿ Down
	memo This item can be selected only at a RGB signal.
	Adjust the horizontal position using the		/ buttons. :
H POSITION	Left ￿ Right
	memo This item can be selected only at a RGB signal.
	Adjust the horizontal phase to eliminate flicker using the / buttons. :
H.PHASE	Right ￿ Left
	memo This item can be selected only at a RGB signal or a component video
	signal other than a COMPONENT port input of 525i/625i/SCART RGB.
	Adjust the horizontal size using the	/	buttons. :
	Large ￿ Small
H SIZE	memo This item can be selected only at a RGB signal.
	memo When this adjustment is excessive, the picture may not be displayed
	correctly. In such a case, please reset the adjustment pressing the RESET
	button during this operation.

Adjust the over-scan ratio using the / buttons. : Small ￿ Large

OVER SCAN memo This item can be selected only at a video signal.

memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

Select the EXECUTE using the button to reset the PICTURE-2 menu items. :

RESET

EXECUTE ￿ CANCEL

The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item “H PHASE” is not reset.

26 © 3M 2004 3M™ Multimedia Projector X70/X80