Contents of the Shipping Container
1. Mill/Drill Machine
Accessory Package:
1. 1/2” Drill Chuck w/ Chuck Key
1. Adjustable Carbide Facemill
1.Facemill Arbor
2.Bolts, Nuts, and Washers to Attach Vise to Table
1.
1.
3. Handle Rods
3. Rubber Knobs
1. 3/8”x1” Hex Socket Cap Screw
1. 3/8” Washer
1. Crank Body
1. Crank Handle
1. 3mm Hex Wrench
1. 5mm Hex Wrench
1.23mm Hex Socket Wrench (JMD- 18/18PFN)
3. Hand Wheels w/ Handles
1. Can
1. Owner’s Manual
1. Warranty Card
1. Lifting Hook
Unpacking and Clean-up
1. Finish removing the crate from the mill/drill. | |
Unbolt the machine from the crate bottom. |
|
Report shipping damage, if any, to your |
|
distributor. |
|
2.Clean all rust protected surfaces using a mild commercial solvent, kerosene or diesel fuel. Do not use paint thinner, gasoline, or lacquer thinner. These will damage painted
surfaces. Cover all cleaned surfaces with a light film of Mobil DTE Oil Heavy Medium.
Tools Needed for Assembly
8” Adjustable Wrench or 1/4” to
6
