z

A Warning

0

• The unit can only be used with a12 VDC power supply, negative ground.

1--

•

Disconnect the battery'snegative terminal before wiring and mounting.

u

• Do not connect Battery wire (yellow) and Ignition wire (red) to the car

w

 

chassis or Ground wire (black) to prevent ashort circuit.

z

• Insulate unconnected wires with vinyl tape to prevent ashort circuit.

z

• Be sure to ground this unit to the car'schassis again after installation.

0

A Caution

u

• For safety'ssake, leave wiring and mounting to professionals. Consult the

...........

 

car audio dealer.

z

•

Install this unit irr the console of your vehicle. Do nottouch the metal

 

parts of this unit during and shortly after use of the unit. Metal parts such

0

 

as the heat sink and enclosure become hot.

-1-

•

Do not connect the 8 wires of speakers to the car chassis or Ground wire

c

 

(black), or connect them in parallel.

...1

•

Connect speakers with amaximum power of more than 50 W. Ifthe

...1

 

maximum power of the speakers is lower than 50 W,.change the

c

 

[AMP GAIN] setting to avoid damaging the speakers. (+ 12)

....

•

Mount the unit at an angle of less than 30°.

z

•

If your vehiclewiring harness does not have the ignition terminal,

"' connect Ignition wire (red) to the terminal on the vehicle'sfuse box

-

 

which provides _12 VDC power supply and is turned on and off by the

ignition key._

• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

• Ifthe fuse blows, first make sure the wires are not touching car'schassis, then replace the old fuse with Qne that has the same rating.

Basic procedure

1Remove the key from the ignition switch, then disconnect thee terminal of the car battery.

2Connect the wires properly. See Wiring connection.(+ 19)

3Install the unit to your car.

See Installing the unit (in-dash mounting).

4Connect the 8 terminal of the car battery.

5Reset the unit.(+ 3)

Part list for installation

(A) Wiring harness

(B) Flat head screw

I

: (C) Round head screw

 

M5 X 8mm (M5 x 3/811 )

MS X 8mm (M5 X 3/811 )

 

'I

 

 

I

 

 

I.

 

( xl )

( x8)

( x8)

Installing the unit (in-dash mounting)

A Use only the specified screws. Using wrong screws might damage the unit.

8 mm (3/8") 8 mm (3/8")

~

I

\.

///. ~-

(A)

Mounting bracket

If there is an interfering tab

on the mounting bracket,

removed from the car

benditflat.

* Screw removed from the car.

 

18

Page 17 Page 19
Page 18
Image 18
JVC KWR710 instruction manual Basic procedure, Part list for installation, Installing the unit in-dash mounting, Benditflat
Page 17 Page 19

KWR710 specifications

The JVC KWR710 is a versatile car audio receiver designed to enhance your driving experience with a blend of outstanding performance, modern technologies, and user-friendly features. This head unit is engineered to be compatible with various media formats, making it an ideal choice for music lovers seeking high-quality audio in their vehicles.

One of the standout features of the JVC KWR710 is its Bluetooth connectivity. This allows drivers to seamlessly connect their smartphones or other compatible devices to the receiver, enabling hands-free calling and wireless audio streaming. The integrated Bluetooth technology supports voice commands, making it easier and safer to manage calls without taking your hands off the wheel.

Sound quality is a key focus of the KWR710, which is equipped with a built-in amplifier that delivers 50 watts of power per channel. This ensures loud, clear audio that can fill your vehicle, while the 13-band graphic equalizer allows users to customize sound output to suit personal preferences. The audio enhancements provided by this EQ make a significant difference, ensuring that every track sounds its best.

The JVC KWR710 also supports various media inputs, including USB and AUX ports, which allow for direct connection to USB flash drives and portable devices. This feature is perfect for those who have music collections stored on USB devices, as it facilitates easy access to a vast array of songs without the need for CDs. Additionally, the receiver supports playback from digital audio files, including MP3, WMA, and WAV formats, ensuring compatibility with a range of audio sources.

Another highlight of this model is its display. The KWR710 features a vibrant 1-line LCD with adjustable colors, providing easy visibility and readability even in bright sunlight. The customizable interface allows users to choose the color that best fits their style or matches the interior of their vehicle.

Furthermore, the KWR710 is equipped with a user-friendly interface, featuring large buttons and straightforward menus for easy navigation, making it simple for users to find their favorite tracks or adjust settings while on the road.

In summary, the JVC KWR710 is a feature-rich car audio receiver that combines advanced technology with excellent sound quality. With Bluetooth connectivity, multiple media input options, a powerful built-in amplifier, and an intuitive design, it stands as an impressive choice for anyone looking to upgrade their car's audio system. Whether you're commuting to work or embarking on a road trip, the KWR710 delivers a superior listening experience that transforms every drive into an engaging auditory adventure.
Top Page Image Contents