JVC UX-J60 manual Disc Direct Recording, To stop while recording, press

To stop while recording, press 7. The tape stops after 4 seconds.

To remove the cassette, press PUSH OPEN 0 on the unit.

• If the tape is recording, stop it first.

2 and 3 to record other tracks

4 Repeat steps you want.

The CD player returns to the beginning of that track and the track is recorded on the tape. After recording, the CD player and cassette deck automatically stop.

Press REC (recording).

REC

Put a recordable cassette in with the exposed part of the tape down.

1

2 Play the track on the disc you wish to record.

3

One Track Recording

This recording method is convenient when you record tracks while playing the disc. You can record just your favorite songs on the tape.

On the unit ONLY:

Disc Direct Recording

Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you have set in Program Play.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

2 Load a disc.

•If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

—If you do not want pauses of about 4 seconds recorded between selections, press CD 3/8 twice. Otherwise, a non-recorded pause will be automatically inserted between selections.

•If you want to record on both sides of a tape, see “To record on both sides—Reverse Mode.”

3 Press REC (recording). REC

The REC (recording) indicator lights up on the display and recording starts.

After recording, the CD player and cassette deck automatically stop.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press PUSH OPEN 0 0

on the unit.

• If the tape is recording, stop it first.

DO NOT open the cassette holder when the tape is running.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) repeatedly			MODE
			REV.
until	or	is lit.

•When using the Reverse Mode for Disc Direct

Recording, lights up and start recording in

the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re-recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.

When making Sleep Timer settings while doing Disc Direct Recording

Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.

0

DO NOT open the cassette holder when the tape is running.

19