Korg KONTROL49 owner manual Change

	Sostenut (Sostenuto)
	Sostenuto (CC#66) messages will be assigned to the foot switch.
	Pressing the foot switch transmits a value of 127, and releasing it
	transmits a value of 0.
	In Play mode, the main display will indicate “Sostn--” when you
	operate the foot switch.
	Soft (Soft Pedal)
	Soft pedal (CC#67) messages will be assigned to the pedal.
	Pressing the foot switch transmits a value of 127, and releasing it
	transmits a value of 0.
	In Play mode, the main display will indicate “Soft--” when you operate
	the foot switch.
	Portmnt (Portamento)
	Portamento (CC#65) messages will be assigned to the pedal.
	Pressing the foot switch transmits a value of 127, and releasing it
	transmits a value of 0.
	In Play mode, the main display will indicate “Porta--” when you
	operate the foot switch.
	CtrlChg# (Control Change)
	A control change message will be assigned to the foot switch. If you
	choose CtrlChg#, press the OCTAVE SHIFT/CURSOR [®] key to
	proceed to “Control Change Select.” (☞p.37 “Assigning a control
	change”)
3	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

(Red) (Green)

4	Use the main encoder or the pads to select the MIDI channel on which
	the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4

“About the trigger pad functions–Input numerical values”)

Operation–Setting mode

5	Press the [ENTER] key.
	The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

■Assigning a control change

If you chose CtrlChg# for “Message Select,” you’ll also need to make settings for “Control Change Select,” “MIDI Channel,” and “Pedal Type.”

1	Choose CtrlChg# for “Message Select,” and then press the OCTAVE
	SHIFT/CURSOR [®] key to move to “Control Change Select” (select

the control change number).

(Red) (Green)

2	Use the main encoder or pads to select the desired control change
	number in a range of 0–127. (☞p.4 “About the trigger pad functions–
	Input numerical values”)
3	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

(Green) (Green)

4	Use the main encoder or the pads to select the MIDI channel on which
	the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4

“About the trigger pad functions–Input numerical values”)

Setting mode

37