LG Electronics 5400 manual Designator Description, Technical Details

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Industry Canada Compliance

This phone complies with Industry Canada RSS 133. This phone complies with the Class B limits for radio noise emissions as set out in the interference causing standard entitled "Digital Apparatus" ICES-003 of Industry Canada.

Technical Details

The LG5400 is a dual-band phone that operates on both Code Division Multiple Access (CDMA) frequencies: cellular services at 800 MHz and Personal Communication Services (PCS) at 1.9 Ghz.

CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep

CDMA Standard

Basic Air Interface

Network

Service

Performance

Designator	Description
TIA/EIA-95A	CDMA Dual-Mode Air Interface
TSB-74	14.4kbps radio link protocol and
ANSI J-STD-008	inter-band operations
	IS-95 adapted for PCS frequency
TIA/EIA-IS2000
	band cdma2000 1xRTT Air Interface
TIA/EIA/IS-634	MAS-BS
TIA/EIA/IS/651	PCSC-RS
TIA/EIA/IS-41-C	Intersystem operations
TIA/EIA/IS-124	Nom-signaling data comm.
TIA/EIA/IS-96-B	Speech CODEC
TIA/EIA/IS-99	Async Data and Fax
TIA/EIA/IS-637	Short message service
TIA/EIA/IS-657	Packet Data
IS-801	Position Determination
	Service (gpsOne)
TIA/EIA/IS-707-A	High Speed Packet Data
TIA/EIA/IS-97	Cellular base station
TIA/EIA/IS-98	Cellular mobile station
ANSI J-STD-018	PCS personal station
ANSI J-STD-019	PCS base station
TIA/EIA/IS-125	Speech CODEC

communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard Handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base station Transmission System), and MS (Mobile Station). The following table lists some major CDMA standards.

* TSB -74: Protocol between an IS-95A system and ANSI J-STD-008

1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High-speed data transmission is also possible.

8

LG5400

LG5400

9