Installation
■Leveling
1. Leveling the washing machine properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
NOTE
• Timber or suspended type flooring may contribute to excessive vibration and unbalance.
Raise | Lower |
Lock |
|
Nut |
|
| Tighten all 4 |
| locknuts securely |
2.If the floor is uneven, turn the adjustable feet as required. (do not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)
•Once the washer is level, tighten the lock nuts up towards the base of the washer. All lock nuts must be tightened.
•Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
NOTE
If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.
15
