Lucent Technologies 9077 04S, 9077 16S, 9076 manual ARP added IP= %s, SW-node=%d, state=%d

Log Messages

Message descriptions

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when the TX-CPU sends an ACK service message to the switch manager. This message was/is used primarily as a debug tool to debug the SP switch manager code.

“ARP added: IP= %s, SW-node=%d, state=%d”

SOURCE_FILE: tx/tbsi_arp.c

LOG_FILE:/var/log/gr.console

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged whenever the TX-CPU adds an ARP entry to the ARP table.

“Bad Hdr/Svc received, Ret code=%d”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/tbsi_svc.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: WARNING

DESCRIPTION: This message is logged when a bad service message header is received. This is an indication that there was some sort of error on the link.

“Board Configuration timed-out, retrying”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: rx/main.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged when a timed-out condition has occurred while the SP Switch Router Adapter card is waiting for it configuration parameters from the RMS. The card will retry, no actions need to be taken.

“Broadcasting an ARP Request.”

“Broadcasting a Gratuitous ARP Request”

LOG_FILE:/var/log/gr.console

SOURCE_FILE: tx/tbsi_arp.c

SCOPE:CARD

CONTEXT:RUNNING

SEVERITY: INFO

DESCRIPTION: This message is logged whenever the TX-CPU broadcasts an ARP request or a gratuitous ARP message.

B-4 SP Switch Router Adapter Guide - 1.4 Update 2