Lucent Technologies PA-8500 manual Scsi Cables Daisy-Chained T800-Series

Chapter 3

If the tape drive is the first drive in the daisy chain and a terminator is connected to either tape-drive port, remove the terminator.

5.Turn off (0) the power switch on each tape drive, See Figure 3.11 .

Figure 3.11. Powering Down the T800-Series( 2nd)

6.Connect the SCSI cables, (part number AW-B21000-12) to the rear of the tape drive and to the U501 SCSI card in slot 7 of the PCI card cages. See Figure 3.12.

Figure 3.12. SCSI Cables: Daisy-Chained T800-Series