Marantz PD4292D manual Basic Operations, To turn the unit on and OFF, To adjust the volume

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the POWER ON button (on the remote control- ler) to turn on.

The monitor’s POWER/STANDBY indicator will light up(green) when the unit is on.

3.Press the POWER OFF button (on the remote control- ler or the unit) to turn off.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control).

VOLUME

To adjust the volume:

1.Press and hold the VOLUME ▲ button (on the remote controller or the unit) to increase to the desired level.

2.Press and hold the VOLUME ▼ button (on the remote controller or the unit) to decrease to the desired level.

MUTE

To cancel the sound:

Press the MUTE button on the remote controller to cancel

sound; press again to restore.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the 4-D1(ON) button to display the pointer. ()

To change the size of the picture:

Press the 2-D1(ZOM+) button and enlarge the pic- ture.

The pointer will change to resemble a magnifying glass. ( )

A press of the 2-D2(ZOM-) button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼◀ ▶ buttons.

2.Press the 4-D1(ON) button to delete the pointer.

DISPLAY

To check the settings:

1.The screen changes each time the OSD button is pressed.

2.If the button is not pressed for approximately three sec- onds, the menu turns off.

25

PD4292D-2 25 00.10.4, 3:11 PM