3 Connect drain hose

Connect drain hose to waste tee or waste disposer

Option C, Waste disposer – with air gap

Waste disposer – with air gap

using one of the following options:

•Option A, Waste disposer - no air gap

•Option B, No Waste disposer - no air gap

•Option C, Waste disposer - with air gap

•Option D, No waste disposer - with air gap

IMPORTANT: The drain hose connection of the disposer or a waste tee must be made before the drain trap and at least 20" (50.8 cm) above the floor where the dishwasher will be installed.

Screw-type clamps

Disposer inlet

Air gap

Large silver drain hose clampl (provided)

Rubber hose connector

Drain hose

Helpful Tip: To reduce vibration of the hose, keep the hose away from the floor.

Option A, Waste disposer – no air gap

Drain trap

Waste disposer – no air gap

Disposer inlet

 

Large silver

 

drain hose clamp

 

 

Drain hose

 

 

 

Drain trap

1

1. Using a hammer and screwdriver, knock

plug into disposer.

1

2

3Black end

4

1. Using a hammer and screwdriver, knock

plug into disposer.

2. Use needle-nose pliers to remove plug.

3. Connect black end of drain hose to air gap

and cut if needed.

NOTE: Do not cut ribbed section.

4. Attach drain hose to air gap with large

silver drain hose clamp (provided). Use

pliers to squeeze clamp open and move

into position. If the drain hose was cut, use

a 1¹⁄₂" to 2" (3.8 to 5 cm) screw-type clamp

2

2. Use needle-nose pliers to remove plug.

3. Attach drain hose to disposer inlet with

5

(not provided).

5. Use a rubber hose (not provided) with

screw-type clamps (not provided) to

connect from air gap to disposer inlet.

3large silver drain hose clamp (provided). Use pliers to squeeze clamp open and move into position.

Option B, No waste disposer – no air gap

No waste disposer – no air gap

 

ScrewLarge-silvertype

 

drain clamphose clamp

 

Waste tee

 

Drain hose

 

Drain trap

1 Black end

1. Connect black end of of drain hose to waste

tee and cut if needed.

 

NOTE: Do not cut ribbed section.

2

2. Attach black end of drain hose to waste tee

with a large silver drain hose clamp (provided).

Use pliers to squeeze clamp open and move

 

 

into position. If the drain hose was cut, use a

 

1¹⁄₂" to 2" (3.8 to 5 cm) screw-type clamp (not

 

provided).

Option D, No waste disposer – with air gap

No waste disposer – with air gap

Air gap

Screw-type clamps

Large silver drain

 

hose clamp

 

(provided)

Waste tee

Rubber hose

 

connector

 

Drain hose

 

Drain trap

1 Black end

1. Connect black end of drain hose to air gap

 

and cut if needed.

 

 

 

 

NOTE: Do not cut ribbed section.

 

 

 

 

2. Attach drain hose to air gap with large silver

 

 

 

 

 

2

 

 

drain hose clamp (provided). Use pliers to

 

 

 

squeeze clamp open and move into position.

 

 

 

If the drain hose was cut, use a 1¹⁄₂" to 2"

 

 

 

 

(3.8 to 5 cm) screw-type clamp (not

 

 

 

 

provided).

 

3

 

 

3. Use a rubber hose (not provided) with

 

 

 

 

screw-type clamps (not provided) to

 

 

 

 

connect from waste tee to air gap.

9

Page 8 Page 10
Page 9
Image 9
Maytag W10282553A Connect drain hose, Waste disposer with air gap, Waste disposer no air gap, No waste disposer no air gap
Page 8 Page 10

W10282553A specifications

The Maytag W10282553A is a refrigerator water filter that plays a crucial role in maintaining the quality and taste of drinking water. This filter is designed specifically for select Maytag refrigerators, ensuring a seamless fit and optimal performance. With a focus on reliability and efficiency, the W10282553A provides several key features and technologies that promote clean and refreshing water.

One of the standout characteristics of the W10282553A is its advanced filtration system. The filter is designed to reduce contaminants such as chlorine taste and odor, lead, mercury, and other impurities that can affect the quality of drinking water. This ensures that every glass of water not only tastes pure but is also safe for consumption.

The installation process of the Maytag W10282553A is user-friendly, allowing homeowners to easily replace the filter without needing professional assistance. The filter is designed to be a direct replacement for compatible models, making it a convenient and practical choice for maintaining optimal refrigerator performance.

Another notable aspect of the W10282553A is its long-lasting performance. The filter typically lasts for up to six months or 200 gallons, depending on usage and water quality. This longevity makes it a cost-effective solution for households looking to enjoy clean and filtered water without frequent replacements.

In addition to its filtration capabilities, the Maytag W10282553A is an environmentally friendly option. By choosing filtered water over bottled water, consumers can reduce plastic waste and contribute to a healthier planet. The filter's design helps minimize the environmental impact while ensuring high-quality water for everyday use.

Furthermore, Maytag is a trusted brand known for its commitment to quality and durability. The W10282553A reflects this reputation, representing reliability and performance that consumers can count on. Ensuring fresh water access is vital for hydration and health, making the Maytag W10282553A an essential component of any compatible refrigerator.

In conclusion, the Maytag W10282553A refrigerator water filter offers advanced filtration technology, ease of installation, long-lasting performance, and environmental benefits. With its focus on providing clean and refreshing water, this filter is an indispensable accessory for maintaining a healthy lifestyle and the overall functionality of Maytag refrigerators.
Top Page Image Contents