Motorola GP68 operation manual Memory Speed Dialing, Programming Memory Speed Dial Numbers

Model ST-865M3 SmarTrunk II™ Logic Board

1.4.2Memory Speed Dialing

This procedure is used for dialing a telephone number or subscriber ID number that is stored in the speed dial memory:

a.Press the * key.

b.Enter the memory speed dial location (0-9).

c.Hear a beep followed by the phone system signal- ling.

d.Wait for the called party to answer the call.

Example: To call a telephone number from the speed dial memory location 6, enter the

following sequence: * 6.

1.4.3Programming Memory Speed Dial Numbers

The following procedure is used for programming a tele- phone number or subscriber ID number into the ST-865M3 speed dial memory.

a.Press and hold the * key until a beep is heard.

b.Enter a memory speed dial location.

c.Enter the telephone number or subscriber ID number that you wish to program into the speed dial memory.

d.Enter the routing code.

e.Press the * key to complete the programming se- quence.

Example: To program the speed dial memory location 3 with the telephone number 555-6666 routed to landline one, enter the following sequence:

*(hold), after the beep, 3 5 5 5 6 6 6 6 1 *

Up to fourteen digit telephone numbers may be programmed. The ability to program speed dial numbers can be disabled by the dealer.

14