• Determine the approximate distance necessary for proper adjustment and proceed, if necessary, to the next step.

•Loosen the two jam nuts on the rear side of the deck stabilizer bracket. See Figure 7A.

Side to Side

•Locate the two lock nuts on the opposite side of the stabilizer bracket. See Figure 7A. Tighten the lock nuts to raise the front of the deck; loosen the lock nuts to lower the front of the deck.

•Retighten the two jam nuts loosened earlier when proper adjustment is achieved.

If the cutting deck appears to be mowing unevenly, a side-to-side adjustment can be performed. Adjust if necessary as follows:

WARNING: Turn the tractor’s engine off, remove the key from the ignition switch and apply the tractor’s parking brake before making any adjustments to the cutting deck.

•With the tractor parked on a firm, level surface, place the lift lever in the top notch (highest position) and rotate the both blades so that they are perpendicular with the tractor.

•Measure the distance from the outside of the left blade tip to the ground and the distance from the outside of the right blade tip to the ground. Both measurements taken should be equal. If they’re not, proceed to the next step.

•Loosen, but do NOT remove, the hex cap screw on the left deck hanger bracket. See Figure 7B.

•Balance the deck so that both blade tip measurements taken earlier are equal.

•Retighten the hex cap screw on the left deck hanger bracket when proper adjustment is achieved.

A

Deck

Stabilizer

Bracket

Deck

Lock Nuts

Jam Nuts

B

Hex Cap Screw

 

 

 

 

 

 

 

 

Deck Hanger Bracket

Front to Rear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Side to Side

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 7

SEAT ADJUSTMENT

To adjust the position of the seat, loosen, but do

NOT remove the four screws which secure the seat

to the seat pivot bracket. Slide the seat forward or

Screws

 

backward until desired position is reached. Retighten

 

the four screws. See Figure 8.

 

Seat Pivot

Bracket

Figure 8

14

Page 13 Page 15
Page 14
Image 14
MTD 607 manual Seat Adjustment, Front to Rear Side to Side
Page 13 Page 15

607 specifications

The MTD 607 is an advanced piece of machinery designed for a variety of agricultural and landscaping applications. Known for its robust performance and durability, the MTD 607 stands out due to its careful engineering and innovative technologies that cater to the needs of modern users.

One of the key features of the MTD 607 is its powerful engine. This model typically boasts an engine with high torque output, providing the necessary strength for tackling tough terrain and dense vegetation. This allows users to perform a wide range of tasks, from mowing larger areas to managing challenging landscapes efficiently. Its engine is not only powerful but also designed to be fuel-efficient, ensuring that users can rely on the machine for extended periods without frequent refueling.

The MTD 607 incorporates cutting-edge technology to enhance user experience and improve productivity. For instance, it features an intuitive control panel that puts all necessary functions at the operator's fingertips. This means operators can easily adjust settings, monitor performance, and manage tasks without having to navigate through complicated systems. Additionally, some models include digital displays that provide real-time feedback regarding speed, operating hours, and maintenance requirements, ensuring optimal performance at all times.

Comfort is another important aspect of the MTD 607. The design prioritizes ergonomic features, featuring adjustable seats and easy-access controls that cater to users of all sizes. This focus on comfort helps reduce fatigue during prolonged use, allowing operators to work more efficiently over longer periods. Moreover, the MTD 607 is built with a sturdy frame and reinforced components that contribute to its longevity, making it a reliable choice for both commercial and residential users.

Safety is paramount in the design of the MTD 607. It includes multiple safety features such as automatic shut-off mechanisms, reinforced guards, and intuitive braking systems. These features work together to provide peace of mind for operators, ensuring safe operation even in challenging conditions.

In conclusion, the MTD 607 is a versatile and powerful machine with a range of features that make it suitable for various applications in agriculture and landscaping. From robust engines and user-friendly technology to ergonomic designs and safety enhancements, it provides an excellent solution for those seeking efficiency and reliability in their outdoor tasks. Whether for professional landscaping services or personal gardening efforts, the MTD 607 is a worthy investment for enhancing productivity and achieving excellent results.
Top Page Image Contents