Navman 4433, 4432 operation manual Displays, Display menu, Sonar display, Data header

5 The Displays

Press DISP to show the Display menu. Use or to select display tab, then select a particular display using the or cursor keys.

The Display menu

The Display menu is summarized here and each display is shown in the following sections.

Most displays have an Options menu so that relevant features can be changed quickly.

Note: Refer to Section 3-2 Setup > Sonar, for information about customizing features on the sonar displays.

Sonar display at a single or mixed frequency (section 5-1)

Sonar split display with zoomed section (section 5-2)

Show zoomed section of sonar

Sonar flat bottom trace in zoomed section (section 5-3)

Sonar split display with 83 and 200 frequencies (section 5-4)

Sonar split display with echo strength (section 5-5)

Show perspective view of sonar (section 5-6)

Fuel data (section 5-7)

Water temperature and depth history and boat data (section 5-8)

Product and wiring information (section 5-9)

5-1 Sonar display

Data header, set up to show the boat speed, sonar status etc.

Depth (medium size digits)

To show the Sonar display, press DISP and select Sonar Tab, select Sonar and press ENT.

This display scrolls from right (most recent echoes) to left (oldest echoes) at the selected frequency (see section 3-2 Setup > Sonar).

To change items, press MENU until the Options menu is shown.

Gain is explained in section 4-4 Gain.

Range is explained in section 4-5 Range.

A-scope is explained in section 5-5 Sonar A-Scope display.

Surface

Fish symbols with depth

Bottom

Range

Data header

The data header can be selected on or off.

When selected, it is a customizable feature that can be used to display up to 9 data items, such as alarms or water temperature.

FISH 4432/4433 Installation and Operation Manual NAVMAN 24