NCR RealScan 7882 Installation and Owner Guide
Step 4 - Mounting the
RealScan 7882
Rubber Feet
The NCR RealScan 7882 Scanner is supplied with rubber feet that can be attached to the sides of the cabinet. This permits the scanner to sit on the checkstand in a vertical position without being mounted to the Vertical Mounting Bracket. There are round recesses in each side of the cabinet that accept the rubber feet. Remove the paper backing from the rubber feet and stick them to the cabinet in the round recesses.
Plastic Top Plate
Your installation may use a Plastic Top Plate. Make sure no rubber feet are attached to the cabinet.
1.Properly align the scanner with the Plastic Top Plate.
2.Fasten the scanner to the Top Plate making sure that all four latches are securely latched around the scanner.
Plastic Top Plate
Scanner
Mounting Latches
18718B
09/02 | 23 of 62 |
