NetComm NB6PLUS4WN, NB6, NB6W, NB6PLUS4, NB6PLUS4W manual Management Control From Remote, 124

Management Control – From Remote

There are various interfaces for the remote access. Please choose from them if you want to enable the remote access control.

Note: NB6 supports Web Browser, Telnet, TFTP and Ping only

Select the Internet Connect:

Select one connection item from the drop-down list to enable the function.

Web Browser:

Check this box if you want to have remote control through HTTP. The default port number is 8080. Modify the port whenever you want.

Telnet:

Check this box if you want to have remote control through telnet.

FTP:

Choose this box if you want to have remote control through FTP.

TFTP:

Choose this box if you want to have remote control through TFTP.

Secure Shell (SSH):

Choose this box if you want to have remote control through SSH.

Ping:

Choose this box if you want to have remote control through ping command under DOS prompt.

Authorized Host IP Address List:

Decide whether all internet hosts can access your IAD or only authorized internet hosts can access. Click Apply to save your setting.

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide	YML854Rev1
124	www.netcomm.com.au