NETGEAR user manual D6300 WiFi DSL Modem Router Power On/Off LED

D6300 WiFi DSL Modem Router

Table 1. Power On/Off LED

Icon	LED Activity	Description
	Solid green	Power is supplied to the router.
	Solid red	POST (power-on self-test) failure or a device malfunction has occurred.
	Off	Power is not supplied to the router.
	Restore Factory	LED blinks momentarily when the Restore Factory Settings button on the
	Settings	bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
		three times when the Restore Factory Settings button is released and then
		turns green as the gateway resets to the factory defaults.

Table 2. DSL LED

Icon	LED Activity	Description
	Solid green	You have an ADSL connection. In technical terms, the ADSL port is
		synchronized with an ISP’s network-access device.
	Blinking green	Indicates that the WiFi modem router is negotiating the best possible
		speed on the ADSL line.
	Off	The unit is off or there is no ADSL connection.

Table 3.	Internet LED
Icon	LED Activity	Description
	Solid green	You have an Internet connection. If this connection is dropped due to an
		idle time-out but the connection is still present, the LED stays green. If the
		Internet connection is dropped for any other reason, the LED turns off.
	Solid red	The Internet (IP) connection failed. See Cannot Access the Internet on
		page 124 for troubleshooting information.
	Blinking green	Data is being transmitted over the Internet connection.
	Off	No Internet connection is detected or the device is in bridge mode (an
		external device handles the ISP connection).

Hardware Setup

15